PlasmaBeam Quattro

Technical Data

1. Supply Unit:

W 430 mm, H 400 mm, D 500 mm

(W 16.9 in, H 15.7 in, D 19.6 in)

Weight: approx 60 kg (132 lbs)

 

2. Plasma Applicator:

Max. Ø 35 mm, L 210 mm (1.3 in, 8.2 in)

Weight: approx 1.5 kg (3.3 lbs)

Cable length: 3 m (118 in)

 

3. Generator:

Frequency: 20 kHz

Power: approx 4 x 300

 

4. Connections:

 Process gas and cooling gas:

Dry, oil-free compressed air

Input pressure: 5 – 8 bar

Gas flow: approx 2 m3 / h (528 gallons / h)

Power supply: 230 V AC / 6 A / 50 - 60 Hz

 

5. Operating Modes:

5.1 Manual Operation:

„Plasma ON" and „Plasma OFF" buttons on the front panel of the supply unit.

 

5.2 Semiautomatic:

Remote control through Remote - connector on the rear panel of the supply unit.

 

Applications

  •  Degreasing / cleaning
  • Hydrophilization
  • Printing pre-treatment
  • Bonding pre-treatment
  • Painting pre-treatment
  • Soldering pre-treatment
  • Coating pre-treatment
  • Molding pre-treatment
  • Gluing pre-treatment
  • . . .

Applications Area

  • Automotive industry
  • Electronic industry
  • Elastomer industry
  • Medical devices manufacturing
  • Optical industry
  • Plastics industry
  • Precision mechanics technology
  • Research and development
  • Packaging industry
  • Solar cell and battery manufacturing technologies
  • . . .

Additional Options

  •  Spare parts sets
  • Compressed air filter
  • Test inks
  • Plasma polymerization set
  • Maintenance contracts
  • Robots with protective casing
  • Customized automation
  • Foot pedal
  • Other options available upon request
  • OEM Version
  • Plasmaindicators

 

The PlasmaBeam is suitable for installation with robots and can easily be introduced into existing automated manufacturing lines.