Celabs CAT5TX HDTV Audio/Video Transmitter Over LAN CAT5 Cable with 2 Outputs

Our Price $103.88 Including 3 - 5 Day Shipping

Back to HDTV Accessories

KEY POINTS - Celabs CAT5TX HDTV Audio/Video Transmitter over LAN CAT5 Cable with 2 Outputs:

• Active amplification ensures high quality transmission
• Loop output for use of additional CAT5 transmitters
• Two CAT5 outputs for additional location
• Discrete passive IR channel for the use of external
• IR remote control systems

SUMMARY - Celabs cat5tx HDTV Audio/Video Transmitter over LAN CAT5 Cable with 2 Outputs:

Distribute high definition component or composite video and digital or left or right audio over extended distances using CAT5 wire. Video & audio loop output to accommodate future expansion to additional CAT5 transmitters and receivers.

DETAILED SPECS - CELABS CAT5TX LAN CAT5 DISTRIBUTION AMPLIFIER:

Video
• Nominal Input Level: 1 Volt peak to peak
• Gain: 1 Volt into 75 ohms (2 Volts unterminated)
• Input Impedance (CAT5 TX): 75 ohms
• Output Impedance (CAT5 RX): 75 ohms
• Isolation port to port: > 65 dB
• Isolation out to input: > 80 dB
• Return loss: > 30 dB
• Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
• Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
• 3 composite video signals may be substituted on the individual component video inputs (1000 Ft. max)
  Audio (Analog)
• Nominal Input level: 1 Volt peak to peak
• Gain: Unity (slightly reduced at max cable length)
• Input Impedance: 22k ohm
• Output Impedance: 1k ohm
• Frequency Response: 20 Hz to 20 KHz
• Signal to Noise: 80 dB @ 1 Volts out Audio (Digital)
• Supports standard SPDIF digital audio Power
• Requirement: External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center) Coaxial connector.

• Dimensions (W x H x D) 6" X 3" X 1 1/2"

• Weight 1.95 lbs
  
  NOTE: Composite video may be used for security or with standard monitors

Manufacturer Homepage: www.cable-electronics.com