|
|
Celabs CAT5RX HD
Over LAN CAT5 Cable Audio/Video Receiver
Our Price $115.88 Including 3 - 5 Day Shipping
Back to
HDTV Accessories |
|
|
 |
CELABS CAT5RX HD
Over LAN CAT5 Audio/Video Receiver
|
KEY
POINTS - Celabs CAT5RX HD
Over LAN CAT5 Audio/Video Receiver:
- Cable length equalizer for long distances
- Video continuity LEDs to ensure all signals are transmitting
- IR port
|
SUMMARY - Celabs cat5rx HD
Over LAN CAT5 Audio/Video Receiver:
Distribute high definition component or composite video and digital or left or right audio over extended distances using CAT5 wire. Video & audio loop output to accommodate future expansion to additional CAT5 transmitters and receivers.
|
DETAILED SPECS - CELABS CAT5RX CAT5
DISTRIBUTION AMPLIFIER:
Video
- Nominal Input Level: 1 Volt peak to peak
- Gain: 1 Volt into 75 ohms (2 Volts unterminated)
- Input Impedance (CAT5 TX): 75 ohms
- Output Impedance (CAT5 RX): 75 ohms
- Isolation port to port: > 65 dB
- Isolation out to input: > 80 dB
- Return loss: > 30 dB
- Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
- Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
- 3 composite video signals may be substituted on the individual component
video inputs (1000 Ft. max).
Audio (Analog)
- Nominal Input level: 1 Volt peak to peak
- Gain: Unity (slightly reduced at max cable length)
- Input Impedance: 22k ohm
- Output Impedance: 1k ohm
- Frequency Response: 20 Hz to 20 KHz
- Signal to Noise: 80 dB @ 1 Volts out
Audio (Digital)
- Supports standard SPDIF digital audio
Power
- Requirement: External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center)
Coaxial connector.
-
Dimensions (W x H x D)
4 3/8" X 3 1/2"
X 1" -
Weight
1.95 lbs
NOTE: Composite video may be used for security or with standard monitors
Manufacturer Homepage: www.cable-electronics.com
|
| celabs cat5rx hd over LAN distribution
amplifier CELABS CAT5RX |