Plasma.com Always Free Shipping

CELabs av501hd 1 Input/5 Output HDTV Component Video Distribution Amplifier with Digital Audio

No Longer Available

Replaced by CE Labs AV501HDX

CELABS AV501HD Hdtv Distribution Amplifier

Click to Enlarge Image

 
CELABS AV501HD 1 Input/5 Output HDTV Component Video Distribution Amplifier with Digital Audio

KEY POINTS - Celabs Av501hd Component Video Distribution Amplifier:

  • 1-Input & 5-outputs
  • Allows any A/V source with Y, Cb, CR, or Y, PB, PR output components to distribute A/V to 5 different locations without any signal loss
  • Compatible with all HDTV, digital & analog video signals
  • Allows up to 150-ft runs

SUMMARY - CeLabs Av501hd HDTV Component Video/Digital Audio Distribution Amplifier:

The AV501HD from CE Labs distributes HDTV and analog television signals from a single A/V source to multiple television receivers. Now you can daisy chain to large number of televisions with equal picture quality. The AV501HD saves the expense of additional A/V receivers and allows up to 150 ft. runs.

DETAILED SPECS - CELABS AV501HD COMPONENT VIDEO DISTRIBUTION AMPLIFIER:

Video

  • Gain: 2 Volt unterminated, 1 Volt Terminated: 75 ohms + 5%

  • Input Impedance: 75 ohms + 5%

  • Output Impedance: 75 ohms + 5%

  • Video Insertion Loss: 50 Hz to 10 MHz < .40 dB

  • In to Out Isolation: 50 Hz to 10 MHz 32 dB Port to Port

  • Out to In Isolation: 50 Hz to 10 MHz 60 dB

  • Return Loss: 50 Hz to 10 MHz 20 dB

  • Video Bandwidth: > 100 MHz

  • Audio Response: > 100 KHz

Audio

  • Gain: Unity

  • Input Impedance: 22k ohm

  • Output Impedance: 1k ohm

  • THD: 0.05% at 1.0 Volts input level

  • Frequency Response: 20 Hz to 100 KHz

  • Channel Separation: > 75 dB @ 1 KHz

  • In to Out Isolation: 60 dB

  • Out to Out Isolation: 60 dB

  • Signal to Noise: 100 dB re 2 Volts (out)

Audio (Digital – AV501HD & AV901HD only)

  • Supports standard SPDIF digital audio. Unity gain when terminated into 75 ohms (2X gain high imp.). Greater than 50 MHz of bandwidth to ensure minimal degradation. (If not used for digital audio, this port can be used to switch standard video).

Power

  • Requirement: External 9 to 10 Volt AC @ 500 mA (AV901HD = 1000 mA) with a 2.1 mm coaxial connector. Power supply is included.

Dimensions (W x H x D)

  • 9 1/16" X 6 1/2" X 1 1/4"

Weight

  • 3.3 lbs

Manufacturer Homepage: www.cable-electronics.com

celabs av501hd component video distribution amplifier CELABS AV501HD

 

Company Information: About Us | Contact | Returns | Shipping Info | GSA & Gov't Purchasing
Customer Service: 1-877-722-8948

Our Other Sites: www.avdeals.com

© 2008 Avdeals America