Draper Access MultiView/Series E Video Projector Screen
|
|
Draper Screens >
Motorized >
Ceiling-Recessed > Non-Tensioned |
|
|
|
Select a Material, Format and Screen Size below
|
Click to Enlarge Image
Screen Size Chart
Motorized Screen Controls
Click here for information on Draper Screen Material
|
|
|
KEY POINTS - Draper Access MultiView/Series E
Video Projector
Screen
Ceiling-recessed, motorized projection screen with independently motorized masking system installed in the same case for dual format projection.
Flat black mask on second motor-in-roller converts the projection screen to a 4:3 NTSC format by masking the right and left sides of the viewing surface.
Height of viewing surface remains constant.
Both projection screen and masking system are independently controlled, each using any standard or optional control. Two, SS-1Rs are supplied. Or, select AMV-C, a low voltage control that allows both motors to be controlled by independent 3-button switches in a single box.
Depending on surface, available in sizes through 133" diagonal HDTV format or 136" diagonal WideScreen format.
Custom sizes available.
|
|
SUMMARY - Draper Access MultiView/Series E
Projector Screen
A ceiling-recessed motorized screen and independently motorized masking system provides dual format projection—all in a ceiling-recessed Access case. Select a projection screen in HDTV or WideScreen format up to 10' wide. A flat black mask on a second motor-in-roller converts the screen to NTSC video format by masking the right and left sides of the viewing surface. The height of the viewing surface remains constant. Motor-in-roller is mounted on special vibration insulators so operating noise is dramatically reduced. The reflective surface is laminated to a woven textile base and hangs suitably flat because of the stability of the material and the weight of the bottom dowel. |
|
Return to Draper Projector Screens Page |
